ATM – Medium Wall Polyolefin Tubing
High shrink ratio and hot melt adhesive, which provide excellent properties of insulation and protection to cable joints and terminations. And high abrasion and corrosion resistance for applying in communication cable and chemical pipe.
Operating temperature range
Operating temperature : -55oC ~ 110oC
Minimum shrink temperature : 80oC
Minimum fully recovery temperature : 120oC
Standard Color : black (other colors, special size, cut pieces are available on request)
| Part Number | As Supplied (mm) | After Recovered (mm) | Standard Length (Meter) | |
|---|---|---|---|---|
| I.D. (min) | I.D. (max) | W.T. (min) | ||
| ATM Medium Wall Tubing with Hot Melt Adhesive | ||||
| ATM008 | 8 | 2 | 1.7 | 1.22 |
| ATM012 | 12 | 3 | 1.8 | 1.22 |
| ATM016 | 16 | 5 | 2.0 | 1.22 |
| ATM019 | 19 | 5 | 2.2 | 1.22 |
| ATM022 | 22 | 6 | 2.2 | 1.22 |
| ATM028 | 28 | 6 | 2.5 | 1.22 |
| ATM033 | 33 | 8 | 2.5 | 1.22 |
| ATM040 | 40 | 12 | 2.5 | 1.22 |
| ATM044 | 44 | 14 | 2.5 | 1.22 |
| ATM055 | 55 | 16 | 2.7 | 1.22 |
| ATM065 | 65 | 19 | 2.8 | 1.22 |
| ATM075 | 75 | 22 | 3.0 | 1.22 |
| ATM085 | 85 | 25 | 3.0 | 1.22 |
| ATM095 | 95 | 25 | 3.0 | 1.22 |
| ATM115 | 115 | 34 | 3.3 | 1.22 |
| ATM140 | 140 | 42 | 3.5 | 1.22 |
| ATM160 | 160 | 50 | 3.5 | 1.22 |
| ATM180 | 180 | 58 | 3.5 | 1.22 |
| ATM205 | 205 | 65 | 3.5 | 1.22 |
| ATM235 | 235 | 65 | 3.7 | 1.22 |
| ATM265 | 265 | 75 | 4.0 | 1.22 |
| ATM350 | 350 | 100 | 4.3 | 1.22 |
| Property | Test Method | Typical Value |
|---|---|---|
| Operating temperature | IEC 216 | -55℃ ~ +110℃ |
| Tensile strength | ASTM D 2671 | ≧14 MPa |
| Elongation at break | ASTM D 2671 | ≧400% |
| Density | ASTM D 792 | 1.05 g/cm³ |
| Longitudinal shrinkage | UL 224 | 0 ~ 10% |
| Eccentricity | ASTM D 2671 | <30% |
| Elongation at break after aging | 150℃, 168 hrs | ≧300% |
| Dielectric strength | IEC 243 | ≧20 KV/mm |
| Volume resistance | IEC 93 | ≧1014 Ω.cm |
| Copper stability | ASTM D 2671 | Pass |
| Resistance to stress cracking (50℃) | ASTM D 1693 | No cracking |
| Water absorption | ISO 62 | <0.15% |
| Thermoplastic Adhesive | ||
| Water absorption | ISO 62 | <0.2% |
| Softening point | ASTM D E28 | 85℃ |
| Peel strength (PE) | DIN 30672 | 4 N/cm |
| Copper stability | ASTM D 2671 | Non-corrosive |
| Resistance to fungus and decay | ISO 846 | Pass |
- Shrinkable Ratio: 3:1
- Easily fit over irregular shape and large connectors
- Resistant to UV and waterproof
- Excellent electrical insulation
Specification
| Part Number | As Supplied (mm) | After Recovered (mm) | Standard Length (Meter) | |
|---|---|---|---|---|
| I.D. (min) | I.D. (max) | W.T. (min) | ||
| ATM Medium Wall Tubing with Hot Melt Adhesive | ||||
| ATM008 | 8 | 2 | 1.7 | 1.22 |
| ATM012 | 12 | 3 | 1.8 | 1.22 |
| ATM016 | 16 | 5 | 2.0 | 1.22 |
| ATM019 | 19 | 5 | 2.2 | 1.22 |
| ATM022 | 22 | 6 | 2.2 | 1.22 |
| ATM028 | 28 | 6 | 2.5 | 1.22 |
| ATM033 | 33 | 8 | 2.5 | 1.22 |
| ATM040 | 40 | 12 | 2.5 | 1.22 |
| ATM044 | 44 | 14 | 2.5 | 1.22 |
| ATM055 | 55 | 16 | 2.7 | 1.22 |
| ATM065 | 65 | 19 | 2.8 | 1.22 |
| ATM075 | 75 | 22 | 3.0 | 1.22 |
| ATM085 | 85 | 25 | 3.0 | 1.22 |
| ATM095 | 95 | 25 | 3.0 | 1.22 |
| ATM115 | 115 | 34 | 3.3 | 1.22 |
| ATM140 | 140 | 42 | 3.5 | 1.22 |
| ATM160 | 160 | 50 | 3.5 | 1.22 |
| ATM180 | 180 | 58 | 3.5 | 1.22 |
| ATM205 | 205 | 65 | 3.5 | 1.22 |
| ATM235 | 235 | 65 | 3.7 | 1.22 |
| ATM265 | 265 | 75 | 4.0 | 1.22 |
| ATM350 | 350 | 100 | 4.3 | 1.22 |
| Property | Test Method | Typical Value |
|---|---|---|
| Operating temperature | IEC 216 | -55℃ ~ +110℃ |
| Tensile strength | ASTM D 2671 | ≧14 MPa |
| Elongation at break | ASTM D 2671 | ≧400% |
| Density | ASTM D 792 | 1.05 g/cm³ |
| Longitudinal shrinkage | UL 224 | 0 ~ 10% |
| Eccentricity | ASTM D 2671 | <30% |
| Elongation at break after aging | 150℃, 168 hrs | ≧300% |
| Dielectric strength | IEC 243 | ≧20 KV/mm |
| Volume resistance | IEC 93 | ≧1014 Ω.cm |
| Copper stability | ASTM D 2671 | Pass |
| Resistance to stress cracking (50℃) | ASTM D 1693 | No cracking |
| Water absorption | ISO 62 | <0.15% |
| Thermoplastic Adhesive | ||
| Water absorption | ISO 62 | <0.2% |
| Softening point | ASTM D E28 | 85℃ |
| Peel strength (PE) | DIN 30672 | 4 N/cm |
| Copper stability | ASTM D 2671 | Non-corrosive |
| Resistance to fungus and decay | ISO 846 | Pass |
Technical Data
| Property | Test Method | Typical Value |
|---|---|---|
| Operating temperature | IEC 216 | -55℃ ~ +110℃ |
| Tensile strength | ASTM D 2671 | ≧14 MPa |
| Elongation at break | ASTM D 2671 | ≧400% |
| Density | ASTM D 792 | 1.05 g/cm³ |
| Longitudinal shrinkage | UL 224 | 0 ~ 10% |
| Eccentricity | ASTM D 2671 | <30% |
| Elongation at break after aging | 150℃, 168 hrs | ≧300% |
| Dielectric strength | IEC 243 | ≧20 KV/mm |
| Volume resistance | IEC 93 | ≧1014 Ω.cm |
| Copper stability | ASTM D 2671 | Pass |
| Resistance to stress cracking (50℃) | ASTM D 1693 | No cracking |
| Water absorption | ISO 62 | <0.15% |
| Thermoplastic Adhesive | ||
| Water absorption | ISO 62 | <0.2% |
| Softening point | ASTM D E28 | 85℃ |
| Peel strength (PE) | DIN 30672 | 4 N/cm |
| Copper stability | ASTM D 2671 | Non-corrosive |
| Resistance to fungus and decay | ISO 846 | Pass |
Characteristics
- Shrinkable Ratio: 3:1
- Easily fit over irregular shape and large connectors
- Resistant to UV and waterproof
- Excellent electrical insulation
